Chinese Name	Brief	English	Cas Number.
Acetate (Ethyl acetylene)	EAC	Ethyl Acetate	141-78-6
ethyldiol monoacetic acid (gamma-butane)	GBL	Glycol Ether (2-Hydroxyethyl address, gamma-Butyrolactone)	96-48-0
Ethylene lactate	El.	Ethyl practice	687-47-8
Acetate (methyl acetate)	MAC	Methyl Acetate	79-20-9
Acetate isobutylene (Acetate isbutyl)	IBAC	Isobutyl Acetate	110-19-0
n-butyl acetate (propylene)	NBAC	- Butyl Acetate	123-86-4
Ethylene diethyl ether	CAC	Cellosolve Acetate (2-Ethoxythyethyl ante)	111-15-9
2-methyloxybutyrin	MOBAC	2-Methoxy-1-butyl acetate	4435-53-4
n-propylene	NPAC	-PropyAcetate	109-60-4
Tributyl acetate	S-BAC	This post is part of our special coverage Syria 2011.	105-46-4
Isopropyl acetate	IPCC	Ispropy Acetate	108-21-4
Ethylene dichlorobutylene	BCELAC	Butyl Cellosolve Acetate (2-Butoxyethyl ante)	112-07-2
Acetylene isate	MMBAC	Methoxyisobutyl anteate	103429-90-9
Diethyl acetate	DEAC	Dietyl Acetate	112-15-2
Dibutyl acetate	DBAC	Dibutyl Acetate	124-17-4
Tetraethyl acetate	NAAC	No-Amyl Acetate	628-63-7
Acetylene acetylene (banana oil)	IAAC	Isoamyl Acetate	123-92-2
1,3-butadiol dipropylene acid	1,3BGDA	1,3-Butylene Glycol Diacrylate	1117-31-3
Acetate dichloroether	MCELAC	Methyl Cellosolve Acetate (2-Methoxyethyl ante)	110-49-6
n-propylene	N-Propy Propionate	_Propyl Propionate	106-36-5
Isobutyric acid	IBIB	Isobutyl Issobutyrate	97-85-8
Dimethyl carbonate	DMC	Dimethyl Carbonate	616-38-6
Dipropadiol monomethyletheracrylate	SOLFINE-MP	Dipropylene Glycol Monomethyl Ether Propionate	3852-09-3
Prodiol propyl	PMP	Propylene Glycol Monopropyl Ether	148462-57-1
ethyldiol diazole	EGDA	Ethylene Glycol Diacetate	111-55-7
Dimethylhydrate Mixtures	DBE	Dibasic Ester mixture.
Dimethylhydrazine	DBE(P)	Diasic Ester	142-96-1
3-Ethyloxypropylene	EEP	Ethyl 3-Ethoxyprojectate	763-69-9
Prodiol diazole	PGDA	Propylene Glycol Diacetate	623-84-7
2,2,4-trimethyl- 1,3-pentadiol monoisomerbutate	TEXANOL	2,2,4-Trimethyl- 1,3-pentanediol Monoisobutyrate (TMPD-MIB)	25265-77-4
Dipropadiol monomethylether acetate	DPAA	Dipropylene Glycol Monomethyl Ether Acetate (DPGMEA)	88917-22-0

Alcohol | Alcohols

Chinese Name	Brief	English	Cas Number.
Ethylene	EG	Ethylene Glycol	107-21-1
Acetylene acetylene propadiol	PMA	Propylene Glycol Monomethyl Ether Acetate (PGMEA)	108-65-6
Propropanol	NPA	n-Propyl Alcohol (1-Propanol)	71-23-8
Methamphetamine	MIBC	Methyl Isobutyl Carbinol	108-11-2
Prodiol	PG	Propylene Glycol	57-55-6
Methanol	MT	Methanol.	67-56-1
Variable ethanol	EA	Denatured Ethanol	64-17-5
Isopropanol	IPA	Ispropyl Alcohol (2-Propanol)	67-63-0
Isobutanol	IBA	Isobutyl Alcohol (2-Methyl-1-propanol)	78-83-1
Pentanol	NBA	n-Butyl Alcohol (1-Butanol)	71-36-3
Tributol (terbutol)	TBA	Tet-Butyl Alcohol (2-Methyl-2-propanol)	75-65-0
3-methyloxy-1, butol	3-MB	3-Methoxy-1-Butanol	2517-43-3
Pine (Pine oil)	Terpineol	Terpineol (α-, beta-, gamma-issues mix)	8000-41-7
Phenol	BA	Benzyl Alcohol	100-51-6
2-ethylhexol	2EH	2-Ethylhexanol (2-Ethyl-1-hexanal)	104-76-7

The ketone type | Ketones.

Chinese Name	Brief	English	Cas Number.
Ethylene	CPN	Cyclopentanone	120-92-3
Dipropanol	DAA	Diacetone Alcohol (4-Hydroxy-4-Methyl-2-pentanone)	123-42-2
Metehadone/2-gketone	MAK	Methyl Amyl Ketone (2-Heptanone)	110-43-0
cyclohexone	ANONE	Cyclohexanone	108-94-1
Acetone.	CP	Acetone.	67-64-1
Methyl ethylene/butane	MEK	Methyl Ethyl Ketone (2-Butanone)	78-93-3
Methamphetamine	MIBK	Methyl Isobutyl Ketone (4-Methyl-2-pentanone)	108-10-1
Heiferone.	IPO	Isophorone (3,5,5-Trimethyl-2-cyclohexen-1-one)	78-59-1
Diatobutyrinone	DIBK	Disobutyl Ketone (2,6-Dimethyl-4-heptanone)	108-83-8

Ether type|Glycol Ethers

Chinese Name	Brief	English	Cas Number.
Dipropanol monoalether	DPGME	Dipropylene Glycol Monomethyl Esther	34590-94-8
Ethyldiol monopropyl ether	IPG	Ispropy glycol	109-59-1
Prodiol monoalether	PM (PGME)	Propylene Glycol Monomethyl Esther (1-Methoxy-2-propanol)	107-98-2
Ethyldiol monoalether	MCS	2-Methoxyethanol (Methyl Cellosolve)	109-86-4
Ethyldiol monoether	ECS	2-Ethyl Cellosolve	110-80-5
Ethylene monobutylene (butoxyethanol)	BCS	2-Butoxyethanol (Butyl Cellosolve)	111-76-2
3-methyloxy-3-methyl-1-butaneol	MMB	3-Methoxy-3-Methyl-1-Butanol (MMB Alcohol)	56539-66-3
Prodiol butyl ether	PNB	Propylene Glycol Butyl Ether
Ethylene monobutyl ether (EDI)	ETB	2-Ethoxyethyl tert-butyl other (2-Tertiary Butoxy Ethanol)	7580-85-0
Diethyldiol monoethyl ether	DE	Diethylene Glycol Monoethyl Esther (Carbitol)	111-90-0
Diethyldiol monobutyl ether	DB	Dithylene Glycol Monobutyl Esther (Butyl Carbitol)	112-34-5
Ethyldiol hexaether	HCS	2-(2-Butoxyethoxy)ethyl acetate	112-25-4
Ethylene ether (phenyloxyethanol)	Phenoxyethanol	Phenoxyethanol (2-Phenoxyethanol)	122-99-6
Four furans.	THF	Tetrahydrofuran	109-99-9

Aromatic and other | Aromatics & Others

Chinese Name	Brief	English	Cas Number.
N-methylacne	NMP	Methylpyrrodone	872-50-4
Dimethylenedioxymethane (dehyde)	DMM	Dimethoxymethane (Methylal)	109-87-5
Methylcyclohexane	MCH	Methylcyclohexane	108-87-2
Toluene	TL	Toluene	108-88-3
Dimethylbenzene (mixed structures)	XY	Xylene (mixed sources)	1330-20-7
Oil fraction (heavy typhus)	P-150	Petrolum Distillates (Hydotreated heavy naphtha)	64742-94-5
Environmental solvent (oil concentrate)	ISOPARE (SFSK-ISO-H)	Hydotreated Light Petroleum Distilate	64742-48-9
Helium for lightstone wax.	ECN-40	Distillates (praleum), hydotreated light paraffinic	64741-66-8
nhexane	N-HEX	n-Hexane	110-54-3
cyclohexane	C-HEX	Cyclohexane.	110-82-7
ngane	N-HEP	n-Heptane	142-82-5
Hexinane.	Isooctane.	2,2,4-Trimethylpentane	540-84-1
One, three-dioxin five.	1,3-Dioxolane	1,3-Dioxolane	646-06-0
cyclooxychloropropane	ECH	Epicloohydrin	1678-91-7
Dry cleaning solvent (white oil)	STOD-SOL	Stoddard Solvent.	8052-41-3
Tetrahydrazine.	TETRALIN	Tetralin (1, 2, 3, 4-Tetrahydronaphthalene)	119-64-2
Paint solvent S-150	S-150	S-150
Paint solvents S-100	S-100	S-100
Deodorant oil	Deodor	Hydotreated Heavy Naphtha (Deodorized Solvent)	90622-45-0

Consumer chemicals | Customized

Category	Purpose	Electrical	Industrial level
Diluent	Carpentry paint thinner.
	Ink thinner.
	Slow dry thinner.
	Dry thinner.
	Valiant.
	Banana water without benzene
	Banana water.
Cleaning agent	Semi-conductor cleaner
	Web cleaner
	Water supersonic scrubber.
	Electronic industrial cleaner.

UV resin

UV resin UUV Resin

Category	Product Model	Main performances	Applications	Officiality	Sticky (cps at 25 °C)	Acid price (mgKOH/g)	Pt-Co	Erasing rate
Standard dual-phenol A-cyclopropylene	G500	High radiance and responsiveness Hardness and endurance	UV paint: paper, plastic, wood UV ink	2	45,000-65,000	≤1.5	≤60	1.5366
Standard dual-phenol A-cyclopropylene	G500-TM	High hardness and high endurance High radiance and responsiveness	UV paint: paper, plastic, wood PVD underpaint UV ink	2	90,000-110,000	≤1.5	≤60	1.5400
Standard dual-phenol A-cyclopropylene	G500-P	High stickyness High-sweet, high-reactive.	UV paint: paper, plastic, wood UV ink	2	6,000-8,500 (cps at 60 °C)	≤1.5	≤60	1.5338
Modified epoxyacrylate	G515	It's soft, it's low. It's good for metal and plastic. The paint is wet.	UV paints: paper, plastic Ink UV. UV Metal Cleaning	2	8,000-18,000 (cps at 60 °C)	≤5	≤500	1.5277
Modified epoxyacrylate	G515-1	It's good. It's soft.	UV paint: paper, plastic, wood UV ink	2	6,000-10,000 (cps at 60 °C)	≤5	≤150	1.5354
Modified epoxyacrylate	G521	Low stickyness It's nice. High density	UV paint: paper, plastic, wood UV Vacuum Base Paint UV ink	2	100-500	<1	≤1(G)	-
Modified epoxyacrylate	G526	It's good. Quick solidification. The paint is wet.	UV ink Raise the force attached to PP, PE, PET.	2	15,000-40,000 (cps at 40 °C)	≤5	≤6(G)	1.525
Modified epoxyacrylate	G525-1	Water-resistant. Promoting robustness The paint is wet and smooth.	UV paints: plastic, wood UV ink	2	6,000-10,000 (cps at 60 °C)	≤5	≤150	-
Modified epoxyacrylate	G525-2	Water-resistant. It's soft, it's low. The paint is wet and smooth.	UV Vacuum Base Paint Ink UV.	2	3,000-6,000 (cps at 60 °C)	≤5	≤150	1..5174
Modified epoxyacrylate	G525-3	Water-resistant. It's soft, it's low. The paint is wet and smooth.	UV Vacuum Base Paint Ink UV.	2	3,000-6,500 (cps at 60 °C)	≤5	≤200	1.5296
Modified epoxyacrylate	G5100X	High-reactivity, high-flow, high-splendour. Yellow-resistant. Low energy solidification	UV paints: paper, plastic, PVD base paint	2	30,000-45,000	≤3	≤200	1.5403
Modified epoxyacrylate	G5200X	Yellow-resistant. High density It's nice.	UV Vacuum Base Paint UV plastic varnish	2	20,000-35,000 (cps at 40 °C)	≤1.5	≤60	1.5471
Modified epoxyacrylate	G5292	Yellow-resistant. High density It's nice.	UV Vacuum Base Paint UV plastic varnish	2	20,000-40,000 (cps at 40 °C)	≤1.5	≤60	1.5467
Modified epoxyacrylate	G528	High acid value It's nice. High density It's good. It's easy to boil.	Glass, steel, wood protection.	2	3,000-4,000	≤70	15-30	-
Modified epoxyacrylate	LED 9350A	Quick solidification. High hardness The paint's wet. The price of sex is high.	Ogurt. Wood Plastic	2	20,000-65,000 (cps at 40 °C)	≤4	≤45	-
Fatty polyurethane dipropylene	W100	It's good to be attached to the metal layer. Water-resistant. It's soft.	UV Vacuum Base Paint	2	16,000-35,000 (cps at 60 °C)	≤1	≤80	1.4763
Fatty polyurethane dipropylene	W100-L	High-flowing and cover-up. Bulletic and soft. It's good for the metal. It's good for different bottoms.	UV Vacuum Base Paint UV bullet wood floor UV oil.	2	13,000-30,000 (cps at 60 °C)	≤2	≤80	-
Fatty polyurethane dipropylene	W200-E	It's soft. Low contraction It's good to be attached to the metal layer.	UV Vacuum Base Paint	2	25,000-43,000 (cps at 60 °C)	≤1	≤80	1.482
Fatty polyurethane dipropylene	W300	Low contraction rate It's soft and good. It's good for the metal. It's hot.	UV Vacuum Base Paint UV Reprint UV bullet wood floor	2	50,000-75,000 (cps at 60 °C)	≤1	≤120	1.4857
Fatty polyurethane dipropylene	W300-P	Low contraction rate It's soft and good. It's good for the metal.	UV Vacuum Base Paint	2	30,000-55,000 (cps at 60 °C)	≤1	≤80	1.4827
Fatty polyurethane dipropylene	W300X-1	Low contraction rate It's soft and good. It's good for the metal. Yellow-resistant.	UV Vacuum Base Paint	2	20,000-40,000 (cps at 60 °C)	≤1	≤70	1.479
Fatty polyurethane dipropylene	W1080T	It's soft. Low contraction rate It's good to be attached to the metal layer.	UV Vacuum Base Paint	2	53,000-72,000 (cps at 60 °C)	≤4	≤80	1.489
Polyurethane Acrylate	W1962-1	It's soft. It's good.	UV Vacuum Base Paint	2	15,000-30,000 (cps at 60 °C)	≤1	≤60	1.494
Polyurethane Acrylate	W2184	It's soft. Extension > 200% Yellow-resistant.	UV paint Glucose	2	20,000-30,000 (cps at 60 °C)	≤1	<1(G)	-
Polyurethane Acrylate	W2184-1	It's soft. Yellow-resistant.	UV paint Wood paint. UV ink	2	80,000-130,000	≤1	<1(G)	-
Polyurethane Acrylate	W2200	It's soft. High Extension	UV paint Glucose Fingerprint.	2	25,000-60,000	≤1	≤60	1.476
Polyurethane Acrylate	W2220	It's soft. High Extension	UV paint Glucose Fingerprint.	2	15,000-30,000 (cps at 60 °C)	≤1	≤60	1.473
Fatty polyurethane acetate	W2240	PC Sticky. Good stretching and stretching. It's better to fight.	Optical glucose Electro-glue.	2	20,000-30,000 (cps at 60 °C)	≤1	15-25	1.473
Polyurethane Acrylate	W2384	It's tough. Low Yellow High-base sticky.	UV glue UV ink	2	10,000-25,000 (cps at 60 °C)	≤1	<1(G)	-
Polyurethane Acrylate	W23951	Containing isocyanate NOC > 11.5 Quick solidification. It's good. It's good to be in the pot.	Double solid PCB circuit board trig Take the next dose.	1-2	App. 8,000	<1	<1(G)	-
Polyurethane Acrylate	W2396	Containing isocyanate NOC > 11.5 Quick solidification. It's good. It's good to be in the pot.	Double solid PCB circuit board trig Take the next dose.	2-3	200,000-250,000	<1	<1(G)	-
Polyurethane Acrylate	W2397	About 4-6% isocyanate NCO Quick solidification. It's soft. It's good. It's good to be in the pot.	Double solid PCB circuit board trig Take the next dose.	1-2	100,000-150,000	<1	<0.5(G)	-
Fatty polyurethane acetate	W2513	Quick solidification. Heat and patience. It's good.	UV softly painted UV glue UV Reprint	3	20,000-40,000 (cps at 60 °C)	≤1	≤70	1.488
Fatty polyurethane dipropylene	W2522	Yellow-resistant. Quick solidification. It's nice.	UV paint: paper, plastic, wood	2	25,000-45,000	≤1	≤80	1.4774
Fatty polyurethane dipropylene	W2525B	It's hot and strong. Heat and patience. It's good for plastic.	UV Vacuum Base Paint UV 3C paint UV Reprint	2	40,000-60,000 (cps at 30 °C)	≤1	≤60	1.4792
Fatty polyurethane dipropylene	W2526B	It's hot and strong. Heat and patience. It's good for plastic.	UV Vacuum Base Paint UV 3C paint UV Reprint	2	70,000-90,000 (cps at 30 °C)	≤1	≤80	1.4821
Fatty polyurethane dipropylene	W2527B	It's hot and strong. Heat and patience. Especially for plastics.	UV Vacuum Base Paint UV glue UV Reprint	2	50,000-70,000 (cps at 40 °C)	≤1	≤60	1.4862
Fatty polyurethane dipropylene	W2533	Yellow-resistant. Quick solidification. It's nice.	UV paint: paper, plastic, wood	2	20,000-40,000	≤1	≤60	1.5077
Fatty polyurethane dipropylene	W2544	Quick solidification. Yellow-resistant. It's nice.	UV paint: paper, plastic, wood	2	20,000-40,000	≤1	≤60	1.4752
Polyurethane Acrylate	W2566	Low colour Quick solidification. It's nice. Responsiveness and yellow tolerance.	Plastic shells (e.g., mobile phones, computers, car lights, etc.) UV coatings: wood, cabinet panels	2	2,000-6,000	≤2	≤60	-
Tri-capable polyurethane methylacrylate	W2583M	Quick solidification. It's got great power. Very nice. Low Yellow	UV oil. UV Light Oil Oxygen.	3	8,000-18,000 (cps at 60 °C)	≤1	<1(G)	-
Fatty polyurethane dipropylene	W266J-75	Magnificent Be patient.	UV softly painted UV glue UV Reprint	2	80,000-150,000	≤1	≤60	1.4845
Fatty polyurethane dipropylene	W2600	Humidity. It's hot. It's oil-resistant.	UV Vacuum Base Paint	2	10,000-25,000 (cps at 60 °C)	≤1	≤70	1.478
Fatty polyurethane dipropylene	W2612	It's hot. Strong.	UV glue UV paint: paper, plastic, wood	2	16,000-24,000 (cps at 60 °C)	≤1	≤60	1.4919
Fatty polyurethane acetate	W2620	Good stretch and endurance. The glass base is detached. Bread with heat.	Freeable.	2	18,000-25,000 (cps at 60 °C)	≤1	10-25	-
Fatty polyurethane dipropylene	W2685	Good for plastic. Hard and strong.	UV glue UV paint: paper, plastic, wood	2	35,000-55,000	≤1	≤60	1.4878
Fatty polyurethane acetate	W2687	Strong. Humidity.	Wood furniture, flooring Thin film, 3C plastic.	6	1,000-2,000	≤1	-	-
Fatty polyurethane tripropylene	W6008	Vibrating Neo-Jia. Strong.	UV Vacuum Spray UV ink UV paints: plastic, wood	3	10,000-20,000 (cps at 60 °C)	≤1	≤60	1.4935
Fatty polyurethane tripropylene	W6009	Vibrating Neo-Jia. Strong.	UV Vacuum Spray UV ink UV paints: plastic, wood	3	16,000-32,000 (cps at 60 °C)	≤1	≤80	1.49
4 official polyurethane acrylate	W1028	Low stickyness Quick solidification. It's got great power. Very nice. Low Yellow	UV paint UV ink spray UV ink	4	1,000-3,000	<1	≤50	-
Fatty polyurethane hexapropylene	W400	Quick solidification. It's pretty tough and it's pretty hard on the surface. Low viscosity, smoothing.	UV 3C paint UV Vacuum Spray UV Scorch	6	20,000-38,000	≤1	≤60	1.4902
Fatty polyurethane hexapropylene	W4010	Quick solidification. High hard and hard to grind. It's pretty tough and it's pretty hard on the surface.	UV 3C paint	6	30,000-50,000 (cps at 30 °C)	≤1	≤60	1.4938
Fatty polyurethane hexapropylene	W4129	Quick solidification. High hard and hard to grind. It's pretty tough and it's pretty hard on the surface.	UV 3C paint UV Vacuum Spray UV Scorch	6	50,000-75,000	≤1	≤60	1.4928
Fatty polyurethane acetate	W4200	High hard and hard to grind. It's very patient. It's oil-resistant.	UV 3C paint PVC floor Oil resistant paint	5	10,000-20,000	≤1	≤150	1.4914
Low sticky polyurethane acetate	W4360	Low viscosity Quick solidification.	UV paint UV ink Unsolved spray	6	3,500-8,500	≤1	<1(G)	-
Fatty polyurethane hexapropylene	W4500	Quick solidification. High hard and hard to grind. Strong and smooth.	UV 3C paint	6	45,000-70,000 (cps at 30 °C)	≤2	≤60	1.5047
Fatty polyurethane hexapropylene	W4560	Quick solidification. High hard and hard to grind.	UV 3C paint	6	50,000-75,000 (cps at 30 °C)	≤3	≤80	1.5045
Fatty polyurethane hexapropylene	W4570	Quick solidification. The price of sex is high.	UV 3C paint	6	25,000-45,000 (cps at 30 °C)	≤2.5	≤70	1.522
Fatty polyurethane hexapropylene	W4600	Neanderthal is good. Low color and low yellow variable Strong and resistant.	UV 3C paint	6	70,000-100,000	≤2	≤60	1.4919
Polyurethane Acrylate	W4670	Quick solidification. High Hardness High-intensity mill	UV 3C paint Ink.	6	35,000-45,000	≤1	<1(G)	-
Fatty polyurethane hexapropylene	W4800	Quick solidification. High hard and hard to grind. Low Color High Fluid	UV 3C paint	6	40,000-65,000 (cps at 30 °C)	≤1	≤60	1.4963
Polytyrene polyurethane polycapacrylate	W4900	Quick solidification. High hard and hard to grind. It's tough and it's pretty bad.	UV 3C paint	9	30,000-58,000 (cps at 40 °C)	≤1	≤60	1.4976
Polytyrene polyurethane polycapacrylate	W4900-H	Quick solidification. High hard and hard to grind. It's tough and it's pretty bad.	UV 3C paint UV Vacuum Spray	9	15,000-35,000 (cps at 40 °C)	≤1	≤60	1.4962
Polytyrene polyurethane polycapacrylate	W4905	Quick solidification. High hard and hard to grind. It's tough and it's pretty bad.	UV 3C paint UV Vacuum Spray	9	40,000-65,000 (cps at 40 °C)	≤1	≤60	1.4979
Polytyrene polyurethane polycapacrylate	W4906	The vibrator is good. High hard and hard to grind. It's pretty tough and it's pretty hard on the surface.	UV 3C paint UV Vacuum Spray UV Scorch	10	40,000-70,000 (cps at 40 °C)	≤1	≤60	1.4969
Low sticky polyurethane acetate	W510	Low viscosity It's nice. It's easy to lighten up with the dumb powder system.	Wood, paper, plastic, ink printing	3	2,000	≤1	-	-
Two energy polyurethane acetate	W2071	It's good for plastic and glass. Gravity conversion temperature Tg (°C): -47.1	Optical Transparency UV pressure.	2	4,000-14,000 (cps at 60 °C)	<1	<1(G)	-
Two energy polyurethane acetate	W4168	It's good for plastic and glass.	Optical Transparency UV pressure.	2	20,000-4,000	<1	<1(G)	-
UV solidification of impregnated gel	W660	High sticky intensity Good sticky. Quick Solid	It's a constant temperature-free UV-resistance.	1	1,500-3,000	≤1	-	-
UV solidification of impregnated gel	W661	High sticky intensity Good sticky. Quick Solid	It's a constant temperature-free UV-resistance. UV structure Battery UV	1	1,500-3,000	≤1	-	-
Polyurethane dipropylene	W680	It's soft. High stretch. High sticky strength	UV glue UV paint UV hand-painting	2	4,500-9,000 (cps at 60 °C)	≤1	≤60	-
Fatty polyurethane acetate	W681	High sticky intensity Good sticky. Nice.	Nasal paste Electronic seal. Blast polyurethane	2	20,000-30,000 (cps at 60 °C)	≤1	≤1	-
Fatty polyurethane acetate	W682	High sticky intensity Good sticky. It's dry.	Sticky in microfixes Blastate	2	30,000-60,000 (cps at 60 °C)	≤1	≤1	-
UV solidification of impregnated gel	W683	High sticky intensity Good sticky. Great, soft, soft. Low Tg	UV tape UV pressure.	2	6,000-18,000 (cps at 60 °C)	≤1	≤1	-
UV solidification of impregnated gel	W688	High sticky intensity Good sticky. Great, soft, soft. Low Tg	PET UV Antimony Interim protective film on PET UV.	2	30,000-50,000	≤1	≤200	1.4563
Fatty polyurethane dipropylene	W991	High hard, strong. It's 1,000 times.	UV Scorch	15	13,000-27,000 (cps at 30 °C)	≤1	≤80	1.49
Fatty polyurethane dipropylene	W992	High hard, strong. It's 1,000 times.	UV Scorch	15	10,000-25,000	≤1	≤100	1.49
High-capacity polyurethane acrylate	W996-1	Gonley wire. High water contact angle	Cover your cell phone. Membrane and hard.	10	800-1,500	≤1	-	-
High-capacity polyurethane acrylate	W9962	Gon's wire is 2500 down. High water contact angle > 107°	Cover your cell phone or spray your oil. Membrane and hard.	9	250-450	-	<1(G)	-
Inorganic M.P.P.D.	W998	High-intensity mill Gon's shaving. Fingerprints.	Wood furniture, flooring Thin film, 3C plastic.	-	400-800	≤1	-	-
Di-capable polyurethane acrylate	LED2650	Quick solidification. It's got great power. Good penetration and hardness	All kinds of electron components protected.	2	5,000-10,000 (cps at 60 °C)	<1	<1(G)	-
Di-capable polyurethane acrylate	LED9100-4	It's got great power. Low heat Quick solidification. Nice.	LED UV paint UV ink Glucose	2	30,000-50,000	20-30	≤60	-
Di-capable polyurethane acrylate	LED9100-5	It's got great power. Nice. It's good.	Phototherapy gel ester Industrial construction	2	35,000-45,000 (cps at 40 °C)	12.73	<1	-
Di-capable polyurethane acrylate	LED9102	Quick solidification. It's got great power. It's low. Low Yellow	Nail gel.	2	18,000-20,000	22±2	-	-
Di-capable polyurethane acrylate	LED9106	Quick solidification. It's got great power. It's low. Low Yellow	Nail gel.	2	6,000-12,000	23±2	-	-
Di-capable polyurethane acrylate	LED9207	Validity. Low fever Better yellow.	Phototherapy gel extension ester 3D printed tree ester	2	50,000-70,000 (cps at 40 °C)	≤1	<1	-
Di-capable polyurethane acrylate	LED9209	Quick solidification. High hardness High radiance. Low heating	It's oily. Garbage.	2	5,500-6,500 (cps at 60 °C)	≤1	15-25	-
Di-capable polyurethane acrylate	LED9210	Quick solidification. Strong. High radiance. Low heating	Quick solidification. Strong. High radiance. Low heating	2	8,000-11,000 (cps at 60 °C)	≤1	15-25	-
Modified polyurethane acrylate	LED9346-3	It's a good watch. It's nice. It's very bright.	Ogurt.	2	17,000-25,000 (cps at 60 °C)	≤5	≤60	1.554
Six-capable polyurethane acrylate	LED 9500	Quick solidification. High hardness It's got great power. Very nice. Low Yellow	Leather and gel.	6	10,000-20,000 (cps at 60 °C)	<1	<1(G)	-
Tri-capable polyurethane acrylate	LED9502	Quick solidification. High hardness It's got great power. Very nice. It's good to be in the pot.	UV paint Glucose Fingerprint.	3	7,000-13,000	<2	<1(G)	-
Tri-capable polyurethane acrylate	LED9601	Quick solidification. Hold on. The paint's scattered. Save Quality	It's a gel.	3	35,000-55,000	≤10	15-30	-
Di-energy polyurethane acrylate	LED9800	There's a lot of inner power. Plastic. Yellow-resistant. Nice.	Special extension. Sculpture.	2	300,000-500,000 (cps at 75 °C)	≤1	≤60	-
Fatty polyurethane acetate	W2676	It's compatible with dye, paint. But it's beautiful. It's hot.	UV vacuum electrocution. TPU Vacuum Spray	3	2,000-2,800	8.0-10.0	≤60	1.4812
Fatty polyurethane acetate	W2677	It's better than W2676. It's good for metal. It's hot.	TPU Vacuum Spray UV vacuum electrocution.	3.5	1,000-1,600	8.5-10.5	≤60	1.4789
Solvent fatty polyurethane acetate	W2679	Low Yellow It's good for metal. Low energy solidification	Vacuum electron (sin) UV paint: paper, plastic, wood Silver base paint. UV plastic varnish	3.5	2,000-3,000	3.5-5.5	≤60	1.476
Fatty polyurethane acetate	W3010	It's good for metal. Yellow-resistant.	UV Vacuum Spray UV Metal Painting	3.2	5,000-7,000	3.5-5.5	≤60	1.473
Polyurethane Acrylate	W3011	It's good for metal.	UV Vacuum Spray	3	2,000-3,100	3	≤60	-
Solvent fatty polyurethane acetate	W3012	It's good for metal. Good endurance. It's hot.	Metal coating	3	2,600-3,200	≤4.5	-	-
Solvent fatty polyurethane acetate	W3015	It's good for metal. Self-reflection Good dumb powder.	Mute paint.	3	6,000-10,000	≤8	-	-
Fatty polyurethane acetate	W3050	It's good for metal. Yellow-resistant.	UV Vacuum Spray UV Metal Painting	3.2	1,500-2,000	5.0-7.0	≤60	1.4884
Fatty polyurethane acetate	W3070	It's nice. It's good for metal. Solvent release is good.	UV Vacuum Spray UV Metal Painting UV 3C paint, UV resistant paint	3.2	2,000-2,800	3.5-5.5	-	1.4889
Fatty polyurethane acetate	W3071	Yellow-resistant. The paint is wet.	UV Vacuum Spray UV Metal Painting UV 3C paint, UV resistant paint	3.2	1,300-1,800	6.0-8.0	≤60	1.4884
Fatty polyurethane acetate	W3075	It's nice. Yellow-resistant. Neanderthal and dysentery.	UV Vacuum Spray UV Metal Painting UV 3C paint, UV resistant paint	3.7	3,000-4,000	2.5-3.5	≤60	1.4887
Fatty polyurethane acetate	W3076	It's nice. Yellow-resistant. Neanderthal and dysentery.	UV Vacuum Spray UV Metal Painting	3.7	1,600-2,300	6.0-8.0	≤80	1.4611
Fatty polyurethane acetate	W3350	It's nice. Yellow-resistant. It's good to bear and to bear. It's good for metal.	UV Vacuum Spray UV vacuum electrocution. UV Metal Painting UV 3C paint, UV resistant paint	4	1,600-2,300	4.0-5.5	≤60	1.4845
Fatty polyurethane acetate	W3360	It's nice. Yellow-resistant. It's good for metal.	UV Vacuum Spray UV vacuum electrocution. UV Metal Painting UV 3C paint, UV resistant paint	4	2,000-2,900	3.0-5.0	≤60	1.4831
Polyester modified acrylate	EA8133	Strong. Fluid and radiant. It's chemical and water-resistant.	UV 3C paint UV paper, plastic light oil. Light oil on UV wood, ink and UV metal	2.5	55,000-80,000	≤3	≤60	1.5151
Polyester modified acrylate	EA8135	High interconnectivity It's good for metal. ♪ High-grow ♪ It's oil-resistant.	UV Vacuum Base Paint UV Vacuum Spray UV 3C paint	4	20,000-35,000 (cps at 60 °C)	≤1.5	≤60	1.5471
Polyester modified acrylate	EA8135-N	High interconnectivity It's good for metal. ♪ High-grow ♪ It's oil-resistant.	UV Vacuum Spray UV 3C paint	4	40,000-60,000 (cps at 60 °C)	≤3	≤80	1.5195
Polyester modified acrylate	EA8136	It's oil-resistant. Fluid and radiant. It's a white fog situation.	UV Vacuum Spray Ink for UV wood and light oil for UV metal	4	48,000-65,000 (cps at 30 °C)	≤1.5	≤80	1.5402
Polyester modified acrylate	EA8202	Low contraction rate Sweat is good, impact is good. It's good.	Ink for UV wood and light oil for UV metal UV 3C paint	1.5	25,000-50,000	≤1.5	≤80	1.53
Polyester acrylate	EA8316	High Hardness It's good. High density Yellow-resistant.	UV wood coating UV plastic paint High-volume UV ink.	3.7	13,000-30,000 (cps at 40 °C)	≤1.5	≤60	1.5362
Polyester acrylate	EA 8329	Promote UV-LED solidification High price. Yellow-resistant.	LED wood coating LED OPV	6	1,500-2,500	≤1.5	≤80	-
Polyester acrylate	EA8226	High Hardness It's good. Yellow-resistant.	Wood instrument mute UV paint	2	3,000-6,500 (cps at 60 °C)	≤5	≤200	1.5296
Polychlorinated polyester Acrylate	EA8336	It's good. The paint is wet. Yellow-resistant.	UV ink Light oil on paper.	-	100,000-150,000	≤25	<2(G)	-
Polyester acrylate	EA84N	Exhaustion efficiency. High Reactivity Yellow-resistant.	Carpentry scrubbed UV paints.	3	80-200	≤5	-	1.474
Polyester acrylate	EA845N	Self-exhausted tree ester Provide soft hand-painted paint.	A wood-damned luminous paint. Mute Ink Plastic mundane oil	2	100-200	3.6	1	-
Polyester acrylate	EA611	Quick solidification. High Glory	UV paint	2	50-100	≤2	≤120	1.479
Polyester acrylate	EA618	With a power booster.	Increased attachment to melamine, processed PET, PVC	2	12,000-28,000	5	≤40	-
Polyester acrylate	EA6183	It's good for plastic. Low viscosity It's compatible with ink.	Plastic paints with a booster. Printing ink Wood paint.	2	1,000-2,000	≤4	≤80	-
Polyester acrylate	EA625	It's hard to keep up with plastic. It's got to be a bit of a pompous. Long-activity with force	UV paint	2	70-170	≤3.5	-	-
Polyester acrylate	EA626	It's good. Good for the humidity of the powder.	UV ink on base materials such as PET, PS, PMMA, Metals and Glass	-	5,000-7,000	>5	-	1.4965
Water UV ester	WU3201	Low contraction It's soft. It's good for the metal.	UV Vacuum Base Paint	2	100-300	-	-	-
Water UV ester	WU3202	Low contraction It's soft. It's good for the metal. It's hot.	UV Vacuum Base Paint	2	200-1,000	-	-	-
Water UV ester	WU3601	Quick solidification. High hard and hard to grind. It's nice.	UV 3C paint High-resistant UV wood paint. UV ink	6	300-700	-	-	-
Water UV ester	WU3601-1	Quick solidification. High hard and hard to grind. It's nice.	UV 3C paint High-resistant UV wood paint. UV ink	6	≤1,000	-	-	-
Water UV ester	WU3604	High-intensity mill It's scalable. It's good for plastic.	Water-based UV plastic face paint.	6	100-1,1500	-	-	-
Water UV ester	WU3001	Prominent physical drying. Good woodmark wetness.	Underground paint of UV wood	5-6	≤100	-	-	-
Water UV ester	WU 30002X	Good woodmark wetness. Magnificent Water soluble	UV wood coating Ink of UV silk	2	13,000-30,000 (cps at 40 °C)	-	-	-
Water UV ester	WU3002X-3	Solute in Water Quick solidification. Yellow-resistant. Very nice.	The wood is protected on a temporary basis.	2	17,000-27,000 (cps at 40 °C)	3-15	≤100	-
Pure acrylate	F727H	P-P-P-P-P-P-P-P-P-P-P-P-P-E-P-P-E-P-P-P-P-P-P-P-P-E-P-P-P-P-P-P-P-P-P-P-P-P-P-E-P-P-P-P-P-P-P-P-P-P-E-P-E-P-E-P-P-P-P-P-P-P-P-P-P-P-E-P-E-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P------------------------- It's good for single ester solubility. It's pretty tough and it's pretty hard on the surface.	UV 3C paint	-	1,000-2,000	-	≤60	1.4844
Polypropylene ester	F745	P-P-P-P-P-P-P-P-P-P-P-P-P-E-P-P-E-P-P-P-P-P-P-P-P-E-P-P-P-P-P-P-P-P-P-P-P-P-P-E-P-P-P-P-P-P-P-P-P-P-E-P-E-P-E-P-P-P-P-P-P-P-P-P-P-P-E-P-E-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-P-------------------------	With a booster. UV ink	1-2	18,000-28,000	≤1	≤2 (G)	-
Acrylic acetylene ester	F119	Quick solidification. Yellow-resistant.	UV ink UV paint	2	70-110	≤1	≤80	1.4672
Methamphetamine polyether acrylate	F094F	Quick solidification. Yellow-resistant.	UV ink UV paint	-	300-600	≤1	≤60	1.4869
Trimethylacrylate	F181	Low smell. Low stickyness Quick solidification.	UV ink UV paint UV ink spray	2-3	App. 100	-	<1(G)	-
Trimethylacrylate	F185	Low smell. Low stickyness Quick solidification.	UV ink UV paint UV ink spray	4	App. 1,000	-	<1(G)	-
Amphiphosphate	WA307	Be patient. Low contraction Water-resistant. It's a chemical.	UV 3C paint UV glue UV Reprint UV wood, ink and light oil on UV metal	1	8-15	≤1	≤30	1.4745
Tepentetrachlorotripropylene	WA305	Solubility. Quick solidification. It's driving down. It's got to be stronger. Hardness and high interconnectivity	Electronic Field UV glue UV paint UV Vacuum Base Paint	3	400-1,000	≤1	≤60	-
Double-temperol hexapropylene acid	WA308	Medium viscosity High interconnectivity density High hardness and high resistance It's chemical and water-resistant.	Electronic Field	6	5,000-10,000	≤1	≤60	-
Double-temperol hexapropylene acid	WA309	Low stickyness High interconnectivity density High hardness and high resistance	Electronic Field	6	1,000-3,000	≤2	≤60	1.4976
Functional unit	D60	Quick solidification. Low contraction rate It's good to be yellow. Hardness and Convergence	UV glue UV paint UV ink	6	900-2,000	≤5	-	1.478
Functional unit	D120	Quick solidification. Low contraction rate It's good to be yellow. It's soft.	UV glue UV paint UV ink	6	900-2,000	5-10	-	1.475
With a power booster.	96F	Save Quality Medium Reaction and Medium Acid Price Water-resistant cooking and cylindrical. It's very strong on metals.		2	200-280	175-195	≤50	-
With a power booster.	907F	Solvent release is good. Low viscosity and acid prices It's hot. It's very strong on metals.		-	10-50	-	-	-
With a power booster.	909F	It's very strong on the PP. Low viscosity and acid prices It's hot. It's very strong on metals.		-	2,000-4,000	-	-	-
UV Thermal Melting	F7040	High stickyness High dispersive power. It's hot.<150°C	Bucky tape. Car wire tape.	-	60,000-120,000 (150°C)	-	<3(G)	60,000-120,000 (150°C)